This lighting kit contains everything you need to add a scale lighting set to your jet. Included in the kit are th efollowing items:
Standard MODUL-4-300-2
The 4-Channel Module completes most of the lighting tasks in model aircrafting, which implement up to four electric and light circuits. It's classic use provides ACL, separated BEACON, position lights and connectible landing lights. Connect the module to a free receiver output and select the desired function via transmitter. Choose between 11 effects that can be selected via travel adjust from -100% to +100%. In addition, the speed of the light effect can be set on the model according to your personal taste as well as to the scale of the model.
2 x SPOT35F-080x2-WE
This innovative 35mm category spotlight is suitable for all larger models and provides, on the basis of its enormous light power and wide angle beam, maximum visibility under all conditions. The integrated overtemperature protection was implemented in the mounted heatsink. In the event of overloading, it switches off the spotlight.
Ideal in tiptanks, hood or also as landing light in big high-winger. Due to the short construction, they are perfectly suitable for fuselage nose and drop down spotlight.
- High-quality aluminium reflector
- Wide angle beam: 100°
- Completely made of massive aluminium, CNC manufactured
- x2-technology for doubling light intensity
- Available in WHITE and WARMWHITE
- Integrated overtemperature protection
Technical Data
Performance: 2x8W reference power
Overtemperature protection: switch-off and clocking of the light at 65-70°
Voltage: 8V, use enclosed resistor additionally for 12V!
Electricity: 0.7A
Beam angle: ~100°
Light intensity: 200x2Lumen WHITE
Light intensity: 180x2Lumen WARMWHITE Dimension: D35x22mm
Weight: 22g (without cable) Delivery: ready to use with 1m connection cable and additional resistor for 3S operation
2 x CAPS-L35
High-quality, planoconvex lense for mounting on 35mm spotlights (SPOT35), very high optical quality.
Material: plasticDimension: D35mmWeight: 3gScope of delivery: 1 piece
PRO16F-080x2-RT
Thin high-performance 16mm light with 8Wx2 and wide beam angle through a special spreading cap. The profile light is delivered as a ready assembled unit on a special, CNC manufactured aluminium PCB and a removable polycarbonate cap as covering. The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 8W-3S adaption cable.
Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These 8W luminaires are not suitable for continuous operation without additional cooling, operation times of a few minutes are possible. Please check operation temperatures. The luminaires are perfectly suited to be BEACON or ACL lights. The integrated temperature sensor will switch off the light in case of overheating, thus the useage as powerful position light is possible.
Technical Data
Electricity: 8W reference power, 8(12)V, 0.7A
Beam angle: >160°
Light intensity: ~50 Lumen RED
Light intensity: ~70 Lumen RED
Light intensity: ~100 Lumen WHITE
Dimension base panel: 16x37mm
Overall dimension: 17x38x9mm
Weight: 5g (without cable)
Delivery: ready to use with 1m connection cable and series resistor for 2S, resistor for 3S enclosed, integrated over-temperture fuse
DUAL18-160-RT/WE Powerful position and flash light in a housing. The profile light of the 11mm series is slim outside and fits optically also onto smaller models. Due to efficient LED emitter, the light has an enormous luminous power despite the compact dimension and thus it's also suitable for bigger models. The innovative, internally positioned cooling surface enables astonishingly compact dimensions with an unique slim design.
In delivery state, the profiled polycarbonate cap is simply attached. It can be varnished separately. It's highly transparent and unbreakable. The assembly of the lamp is astonishingly easy: With a simple surface mount, all you need is a slit of 3x28mm. In this way, the luminaire can be also mounted on smaller wing tips or fuselage. If desired, you can recess the luminaire up to 4mm, thus achieving an even smaller construction. The cap must be glued after the final assembly.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 4W-3S adaption cable. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation.
Technical Data
Electricity: 4W RED and 4W WHITE reference power, 8(12)V, 2x0.7A
Beam angle: >160°
Light intensity: ~500 Lumen RED
Light intensity: ~70 Lumen GREEN
Light intensity: ~140 Lumen WHITE
Dimension assembly pin: 3x28x15mm
Dimension light cap: 11.5x42.5x10mm, up to 4mm lowerable without loss of beam angle
Total mass: 11.5x42.5x70mm
Weight: 9g (without cable)
Delivery: ready to use with 1m silicon cable and series resistor for 2S operation, resistor for 3S enclosed
DUAL18-160-GN/WE Powerful position and flash light in a housing. The profile light of the 11mm series is slim outside and fits optically also onto smaller models. Due to efficient LED emitter, the light has an enormous luminous power despite the compact dimension and thus it's also suitable for bigger models. The innovative, internally positioned cooling surface enables astonishingly compact dimensions with an unique slim design.
In delivery state, the profiled polycarbonate cap is simply attached. It can be varnished separately. It's highly transparent and unbreakable. The assembly of the lamp is astonishingly easy: With a simple surface mount, all you need is a slit of 3x28mm. In this way, the luminaire can be also mounted on smaller wing tips or fuselage. If desired, you can recess the luminaire up to 4mm, thus achieving an even smaller construction. The cap must be glued after the final assembly.
The luminaire is ready to use for operation with 2S LiPo (ca. 8V). With 3S (12V), the enclosed resistor has to be used. Alternatively you can use a 4W-3S adaption cable. Please note that high-performance LEDs can get very hot, up to 70°C is quite normal. These lamps with heatsink cases are suitable for continuous operation if an air flow (during flight) is possible. If this is not the case, the duty cycle of 5-10 minutes should not be exceeded. Please check operation temperatures after installation.
Technical Data
Electricity: 4W RED and 4W WHITE reference power, 8(12)V, 2x0.7A
Beam angle: >160°
Light intensity: ~500 Lumen RED
Light intensity: ~70 Lumen GREEN
Light intensity: ~140 Lumen WHITE
Dimension assembly pin: 3x28x15mm
Dimension light cap: 11.5x42.5x10mm, up to 4mm lowerable without loss of beam angle
Total mass: 11.5x42.5x70mm
Weight: 9g (without cable)
Delivery: ready to use with 1m silicon cable and series resistor for 2S operation, resistor for 3S enclosed
