Cortex 3-Axis Aircraft Gyro

A new 3-axis stabilization system for fixed-wing model aircraft.
Availability: 1 in stock
Manufacturer: bavarian DEMON
£215.00

The CORTEX is specially designed for all current fixed-wing aircraft models of any type and size and is regarded as surely the most universal 3-axis gyro worldwide. The model is now much quieter, more accurate and inured in strong or gusty wind. They fly thus safer and more precise! The control characteristic can be set extremely flexible by making use of additional tuning parameters via PC software (USB cable needed, available as accessory). The standard scope of supply without PC connection is overwhelming and leads to 100% satisfaction for most pilots.. All in all it is a must-have for every fixed-wing pilot.

  • No PC necessary
  • Easy to Run: simply read in your corrent control signals – ready
  • Supports up to 5 channels, e.g.
  • ⇒ 2 ailerons, 2 elevators, 1 rudder or
  • ⇒ 4 ailerons, 1 elevators etc.

Power for everything. And for each type of RC airplane.

Ground-breaking 3-axis stabilisation system. Gyro CORTEX has a high-quality, is reliable and universal. Whether a Parkflyer, 3D Acro model or turbine jet, this gyro fits every RC aircraft. 100% reliable sensors. The latest soft-ware algorithms. Everything in more remarkably small and CNC-milled aluminium housing. Together, these fea-tures bring the gyro to a whole new level. And they will do the same for your RC aeroplane. Whatever you do, you will notice the difference - your remote controlled aeroplane is in the air, starting and landing work per-fectly and strong or gusty winds are no longer a problem.

Bavarian Demon 3-Axis Gyro CORTEX

Immediately 'Ready to Run'.

Simply read in existing signals and take flight.

The Cortex does not require any PC or additional software settings - unless it is desired. You do not want to wait too long and start immediately? You can teach the existing signals such as servo, control functions and mixer settings via the stick travel and your aeroplane is ready to soar through the air. It couldn't be easier.

Compatible. Universal. Strong.

The versatility leaves nothing to be desired.

The CORTEX supports up to 5 freely selectable channels, e.g., 2 ailerons, 2 elevators and a rudder or 4 ailerons and one elevator etc. In addition to all standard receivers, the gyro CORTEX is compatible with various sum signal reception systems, such as S-bus (input), 2 spectrum/JR satellites and all PPM sum signals. Software and firmware updates can be completed in the Internet at any time.

Scope of delivery & gadgets.

Greatest possible flying satisfaction - without worries.

Get to know the carefree demonic satisfaction of flying with a bavarianDEMON. With emphasis placed on "carefree". The bavarianDEMON is coming to you, equipped with a sensor unit, connection cable harness, mounting pads,   exclusive design and information material. Operating instructions and PC software are available for download under the "Service" heading at Software / Firmware and Manuals / Data Sheets. Additional spending caused by crashes are considerably reduced through a "DEMON inside" because training with this device is simply faster and more efficient. Even experienced pilots who have used CORTEX once no longer want to do without the "DEMON inside".

  • bavarian DEMON CORTEX incl. adhesive pads
  • Connection cable harness
  • Jumper for programming
  • USB Adapter not included
Customers who bought this item also bought

Macgregor MG5921 HV Servo

Dead band: 1µs Working frequence: 1520µs / 330hz Motor: coreless motor Operating Speed (6.0V): 0.152sec/60° Operating Speed (8.4V): 0.123sec/60° Stall Torque (6.0V): 17.25 kg.cm (239.55oz/in) Stall Torque (8.4V): 20.32 kg.cm (281.89 oz/in) Dimensions: 40.5 x 20.5 x 36.5mm /1.59 x 0.80 x 1.43in Weight: 59.3g (2.09oz) Connector Wire Length: 265 mm (10.43in) Bearing: 2BB
£31.95

8W Eco-Spotlight, convex 60°, 25mm, T-Fuse

Powerful high-performance spotlight in a compact and cheap enclosure.
£19.90